User manual

Nero Express Manual
20
© 2017 Nero AG and Subsidiaries. All rights reserved.
Splits the audio file at the set index positions.
Enlarges the graphical representation of the audio file.
Reduces the graphical representation of the audio file.
Displays a graphical representation of the entire audio file.
4.1.1.3. Filters Tab
The Filters tab includes filters that improve or change the quality of the music. The so-
called non-destructive procedure is used for processing, i.e. the actual recording is not
changed, but flags are simply set that can be canceled at any time. No additional audio
data is created. The audio files on hard drive are not modified during this procedure.
The following configuration options are available in the Audio Track Properties window:
Sets the volume of an audio file to a preset value. This filter can be useful to
bring the volume of files originating from different sources into line with
one another.
Removes clicking and scratching noises, such as those on old LPs for
example.
Reduces or removes the hiss on an audio file. All frequencies below a
certain threshold (hiss level) are removed.
Fades in the volume of an audio file from zero to full volume. This filter can
be useful for shortening files.
Fades out the volume of an audio file from full volume to silence. This filter
can be useful for shortening files.
Increases/reduces the stereo effect of an audio file. This filter only works if
the original file was recorded in stereo.
Fades out the vocals on an audio file. This is done by fading out the parts of
a song that are the same in both stereo channels.
Adds an echo to the audio file.