User manual

Nero Express Manual
30
© 2017 Nero AG and Subsidiaries. All rights reserved.
Check box
Quick copy
Enables direct copying from the source to the destination drive. Data is
not buffered on the hard drive during this process.
The option On-the-fly is only available if there are at least two drives
connected (does not apply for Nero Image Recorder). If this check box is
not selected, an image file will be created first, which is then burned.
Selection list
Write speed
Defines the speed at which the disc is burned. Only the burn speeds that
are supported by the selected recorder are displayed.
Not available for Nero Image Recorder.
Input field
Number of
copies
Defines the number of copies you require.
Check box
Verify data on
disc after
burning
Verifies whether the burned data is identical to the original data.
Not available for Nero Image Recorder.
Display field /
Button
Image file
Defines the folder where the image file is stored. You can change the
name of the image file and target folder.
Not available for Nero Image Recorder.
The following configuration options are available in the extended area:
Check box
Read all
subchannel data
Reads all subchannel data during copying. Subchannel data is used to
save additional information, e.g. CD Text or the lyrics of a karaoke CD.
Select this check box when copying an Audio CD or a karaoke CD.
The burner has to be capable of reading all the subchannel data.
Check box
Determine
maximum
transfer rate
Checks how fast the compiled data can be accessed and reduces the
selected writing speed if necessary. This prevents a buffer underrun.
Recorders with a feature to prevent buffer underruns do not require a
speed test. Current recorders mostly have such a feature.
Not available when saving with Nero Image Recorder.
Check box
Simulation
Performs all steps in the burn process without using the laser beam. You
can assume that if simulation is successful, the burn process will also be
successful.
Not available for Nero Image Recorder.
Check box
Write
Starts the actual physical burn process (e.g. after a simulation).
This check box is selected by default.