User manual

Nero Express Manual
38
© 2017 Nero AG and Subsidiaries. All rights reserved.
8. About Burning
8.1. Burn Process
To select one of the available recorders, to define the burn settings for your project
according to your requirements, and to start the burn process, proceed as follows:
1. Compile a project of your choice.
2. Click the Next button.
 The Final Burn Settings screen is displayed.
3. Insert a suitable blank disc in the selected drive.
4. Select the recorder you want from the Current recorder drop-down menu.
5. Add to the desired values in the input fields as necessary and select the required
check boxes.
6. Add to the desired settings in the extended area.
7. Click the Burn button.
 The Burn Process screen is displayed and the burn process starts. You can follow the
process status in the status bar.
 If the SecurDisc Surface Scan check box is selected, the SecurDisc Surface Scan
Results window is opened.
 Nero Express starts with the surface scan. The results are displayed in realtime.
 When the burn process has finished, a message window is opened.
8. Click the OK button.
9. If you would like to save a log of the burn process, click the Save button.
10. Click the Next button.
 You have successfully burned a project and can now continue by selecting another
option from the final screen or by exiting Nero Express.
8.2. Burn Settings
In the Final Burn Settings screen, you can define the burn settings to suit your
requirements, use Nero Image Recorder to save a project to the hard drive as an image
file or start the burn process.