User manual

Nero Express Manual
40
© 2017 Nero AG and Subsidiaries. All rights reserved.
The following setting options are available:
Button
Saves the
active project
Opens the Save As dialog box.
You can save your compilation here.
Selection list
Writing speed
Defines the speed at which the disc is burned. Only the burn speeds that are
supported by the selected recorder are displayed.
Not available when saving with Nero Image Recorder.
Selection list
Write method
Defines the Disc/Session-at-once or Track-at-once write method.
Using the disc-at-once method the entire disc can be burned without the
write laser having to stop. With the track-at-once method the laser turns off
after each track.
Available for CD compilations only. By default DVDs are burned using the
disc-at-once method.
Check box
Determine
maximum
transfer rate
Checks how fast the compiled data can be accessed and reduces the
selected writing speed if necessary. This prevents a buffer underrun.
Recorders with a feature to prevent buffer underruns do not require a speed
test. Current recorders mostly have such a feature.
Not available when saving with Nero Image Recorder.
Check box
Simulation
Performs all steps in the burn process without using the laser beam. We
recommend running a simulation if you are decompressing data before
burning, e.g. when burning an Audio CD from MP3 files. You can assume
that if simulation is successful, the burn process will also be successful.
Not available when saving with Nero Image Recorder.
Check box
Write
Starts the actual physical burn process (e.g. after a simulation).
This check box is selected by default.
Check box
Automatically
shut down the
PC when done
Automatically shuts down the PC after the burn process has ended.