User manual

Nero Express Manual

9. Create Labels

9.1. LightScribe

Using Nero Express and a LightScribe recorder you can create or load labels that you can

burn onto the label side of CDs/DVDs in the LightScribe recorder. The function is available

as a separate Print LightScribe Label option in the start screen or can be integrated as

an intermediate step into the creation and burn process of a project.

This function is only available in the full version of Nero Express that is included

in Nero Classic. You can always upgrade at www.nero.com to get the full version with all

the functions.

This function is only available in recorders that support LightScribe technology.

9.1.1. Printing LightScribe Label

To create and print a LightScribe label for your CD/DVD, proceed as follows:

1. Select the LightScribe recorder you want to use in the Recorder section of the

extended area in the start screen.

2. Insert a blank LightScribe disc into the LightScribe recorder with the label side

facing down.

 The Print LightScribe Label menu icon in the Nero Express start screen is displayed.

3. Click the Print LightScribe Label menu icon.

 The Print LightScribe Label option is displayed.

4. Click the Print LightScribe Label option.

 The Disc Label screen is displayed.

5. Create a label according to your requirements.

The interface in the Disc Label screen works on the same principle as Nero

CoverDesigner. Basically, it is irrelevant whether you print the label on paper or directly

onto an appropriate disc.

Please see the separate Nero CoverDesigner user manual for full instructions on how to

make professional looking covers and labels.