User manual

Nero Express Manual

6. Click the Next button.

 The LightScribe Print Properties screen is displayed.

7. Add to the required values in the input fields and enable the option button for the

desired print quality.

8. Click the Print button.

 The printing process begins. You can follow the process status in the status bar. As

soon as printing is finished, the Nero – LightScribe dialog appears and displays a

message about the result of the printing process.

9. Click the OK button.

10. Click the Next button in the LightScribe Print Properties screen.

 You have successfully created and printed a LightScribe label according to your

requirements and can now continue by selecting another option from the final screen

or by exiting Nero Express.

 It is possible to burn the label several times to the same LightScribe disc. The printed

labels will be aligned. This darkens the label and often improves the quality. It is also

possible to extend the label with new elements in an additional burn process. Note to

save the created label if you want to use it once again.

Burning LightScribe label Within the Compilation

To integrate the creating and burning of a LightScribe label in your compilation project,

enable the Always print LightScribe label check box in the Options. The Disc

Label screen will then be displayed after you have compiled your project (as long as the

LightScribe recorder is selected). The label print process will be executed after burning of

the data side.

9.1.2. LightScribe Print Properties Window

You can customize the print properties of your LightScribe label to suit your requirements