User manual

Nero Express Manual
46
© 2017 Nero AG and Subsidiaries. All rights reserved.
inserted with the label or data side. Either the Labelflash or the DiscT@2 logo is displayed
in the Burn Label window depending on which side is inserted.
The following configuration options are available in the Burn Label window:
Input field
Inner Radius
Defines the distance between the label and the inner edge.
Input field
Width
Defines the width of the print area.
Button
Change
Opens the Labelflash Print Properties window.
This is where you can change the printing quality and the contrast level and
display the changes made directly in the print preview.
Button
Preview
Opens the Print Preview window that shows how the label should appear
on the Labelflash disc.
Selection list
Label
templates
Contains a selection of different templates for designing the label. You can
continue to edit and customize a selected template.
Button
Burn
Starts the burn process.
Button
Cancel
Cancels the procedure and closes the window.
If you are creating a DiscT@2, Nero Express displays only the available print area for
creating the label by default, i.e. the area on the data side of your DVD that is not already
taken up by data. You cannot increase the radius of the print area.
9.2.2. Printing Labelflash Labels and DiskT@2
Basically, it is irrelevant whether you print on the label or the data side when creating
labels. The label is actually printed outside the normal burn process.
You can print on the label side of the DVD at any time.
We recommend that you print on the data side first when you have burned the
compilation. It is not possible to burn data on a printed data side. When you insert a DVD
on which data has already been burned, Nero Express automatically identifies the space
that is still available on the data side and on which you can print.