User manual

Nero Express Manual
47
© 2017 Nero AG and Subsidiaries. All rights reserved.
To print a Labelflash label on the label side or a DiskT@2 on the data side of your DVD,
proceed as follows:
1. If you want to print a Labelflash label on the label side, insert a blank Labelflash
disc into the recorder with the label side facing down.
 The Burn Label window is opened with the Labelflash logo.
2. If you want to print a DiskT@2 on the data side, insert a blank Labelflash disc with
the data side facing down in the recorder.
 The Burn Label window is opened with the DiskT@2 logo.
3. Create a label according to your requirements or open a label that you have already
created with Nero CoverDesigner.
The interface in the Burn Label window and creation of a label work on the same
principle as Nero CoverDesigner. See the separate Nero CoverDesigner manual for full
instructions on how to create professional looking covers and labels.
4. If you want to change the area in which the label is printed, change the print area
accordingly using the input fields Inner Radius and Width.
5. If you want to view or change the print properties:
a. Click the Change button.
 The Labelflash Print Properties window is opened.
b. If you want to change the printing quality, select a quality level from
the Print quality profile drop-down menu.
c. If you select the User defined entry from the Print quality profile drop-
down menu, you can change the contrast level and the rotation speed.
d. Click the OK button.
 The Labelflash Print Properties window is closed and the changes are
accepted.
e. Click the Burn button.
 The labeling procedure starts and the Labelflash - printing or DiscT@2 -
printing window is opened. The window shows the estimated printing time
and the print progress. When printing is complete, a message window is
opened informing about the successful print process.