User manual

Nero Express Manual
52
© 2017 Nero AG and Subsidiaries. All rights reserved.
Overburning
Overburning means writing more data on the disc than originally intended. It is achieved
by reducing the lead-out area to a few seconds, which is sufficient in most cases. However,
this violates the CD standard and may result in recording and playback errors (depends
on the used recorder).
10.1.4. Ultrabuffer Settings
The following configuration options are available on the Ultrabuffer tab:
Selection list
Method
Defines the memory capacity that Nero Express uses as a RAM buffer.
The ultrabuffer is a second memory that enhances the physical buffer in
the recorder.
Input field
Data buffer size
Defines the memory capacity that can be manually entered.
The input field is only enabled when Manual Configuration is selected
in the selection list.
10.1.5. LightScribe Settings
The following configuration options are available on the LightScribe tab:
Area
Print contrast
Adjusts the desired print quality.
Selection list
Default
LightScribe drive
Selects the drive with the LightScribe recorder.
Selection list
Genre
Specifies the genre.
Selection list
Current template
Defines a template for labels.
Selection list
Default print
resolution (DPI)
Adjusts the desired print resolution.
Check box
Always print
LightScribe label
Offers the option to create and burn a LightScribe label automatically
when burning with a LightScribe recorder.
This tab is only available if a LightScribe recorder has been installed.