User manual

Accessing InCD
Page 22
5.3 InCD preferences
Before starting InCD, you can define the general behavior of InCD and establish how InCD
responds when a disc is inserted:
The following setting options are available in the InCD Preferences window for this purpose:

General tab (see the chapter Defining general InCD preferences)
Hide tray icon
check box
Enables/disables display of the icon for InCD in the system
tray.
Permanently show
changes in the tray icon
area
check box
Enables/disables permanent display of the InCD icon in a
different shape according to which drive or disc is involved.
If the box is not checked, the shape of the InCD icon only
changes temporarily when the status of the drive and/or
disc changes.
Do not show 'Format
complete' messages
check box
Enables/disables display of a message at the end of the
formatting process.
Check box
Enable the advanced
options
Enables/disables the advanced formatting options. This
box must be checked if you want to select a file system
other than the UDF 1.50 file system used by default.
Show only the basic
event notifications
check box
Enables/disables display of only the most important infor-
mation on events during your work with InCD. This setting
is completely adequate in normal mode.
Keep open dialog box
with
event notifications
check box
Enables/disables display of an information area in the bot-
tom right-hand corner of the screen.
Check box
Do not display decora-
tive icons with high
contrast
Enables/disables high-resolution display of the menu icons
on the InCD user interface.
Language drop-down
menu
Allows you to select the language that should be used by
InCD.

Auto-Format tab (see the chapter Defining an action on insertion of a blank disc)
Do nothing
option button
No action is executed when a disc is inserted.
Auto-format
(if possible)
option button
Starts a quick format when a disc is inserted if this is pos-
sible.
Open format dialog
option button
Opens the formatting dialog on insertion of a disc.
Let InCD
decide
option button
InCD decides which of the three aforementioned options
will be selected based on the recorder and disc inserted.

Ejecting writable discs tab (see the chapter Defining an action on ejection of an open R
disc)
Interactive choice
option button
Before ejecting a write-once disc (R disc), this displays a
dialog box that you can use to have the disc ejected either
immediately or only when the session is finished.