Manual Nero InfoTool
Copyright and Trademark Information This document, like the software described therein, is provided as a license and may only be used or reproduced in accordance with the licensing agreement. The contents of this document, as well as the associated software, is subject to change without prior notice. Nero AG rejects any responsibility for the correctness of the contents of this document and rejects any claims that transcend the clauses of the guarantee agreement.
Table of contents Table of contents 1 1.1 1.2 Start Successfully About the Manual About Nero InfoTool 4 4 4 2 Starting The Program 5 3 3.1 3.1.1 3.1.2 3.2 Nero InfoTool Window Saving and Printing the Log Saving the log Printing the log Verifying System Requirements for Blu-ray 6 9 9 9 10 4 4.1 4.
Start Successfully 1 Start Successfully 1.1 About the Manual This manual is intended for all users who want to learn how to use Nero InfoTool. It is process-based and explains how to achieve a specific objective on a step-by-step basis. To make best use of this documentation, please note the following conventions: Indicates warnings, preconditions or instructions that have to be precisely followed. Indicates additional information or advice. 1.
Starting The Program 2 Starting The Program To start Nero InfoTool via Nero StartSmart, proceed as follows: 1. Click the Nero StartSmart icon. The Nero StartSmart window is opened. 2. Click the button. The list of Nero applications is displayed. Nero StartSmart window 3. Select the Toolbox > Nero InfoTool entry in this selection list. The Nero InfoTool window is opened. You have launched Nero InfoTool via Nero StartSmart.
Nero InfoTool Window 3 Nero InfoTool Window The Nero InfoTool window offers comprehensive information on eight tabs.
Nero InfoTool Window The following buttons and drop-down menus are available in the Nero InfoTool window: Save Opens the Nero InfoTool – Save/Print window and saves the log generated by Nero InfoTool. Print Opens the Nero InfoTool – Save/Print window and prints the log generated by Nero InfoTool. Button Button Button Refreshes the log generated by Nero InfoTool. Refresh Button Closes Nero InfoTool. Exit Drop-down menu Displays all connected recorders for selection.
Nero InfoTool Window The following setting options are available on the HD Readiness tab: Drop-down menu Displays the tasks for which the system requirements are verified. Verify the system requirements for Display area Your system Display area Link Displays a table, whose columns show the tested components, information about whether an upgrade is required, and the details of the tested components. Displays whether system upgrades are required and provides a link to the system requirements list.
Nero InfoTool Window Area Content Displays information about the contents of the inserted disc, such as the name or creation date of the disc. The following information is displayed on the Configuration tab: Folder tree Displays the driver(s) of the selected entry when it is expanded. Driver Area Displays information about the driver selected in the tree according Driver Information to the selection.
Nero InfoTool Window 3.1.2 Printing the log To print the log, proceed as follows: 1. Click the Print button. The Nero InfoTool – Save/Print window opens. 2. If you do not wish to print information from certain areas: 1. Clear the boxes for the areas that you wish to exclude in the check box area of the Nero InfoTool – Save/Print window. 2. To see what the log will look like without the deactivated areas, click the Preview button. The log preview is refreshed. 3. Click the Print button.
Technical Information 4 Technical Information 4.1 System Requirements Nero InfoTool is part of the Nero product you have installed. Its system requirements are the same. Detailed system requirements of this and all other Nero products can be found in the Support section on our Web site www.nero.com. 4.2 Key Combinations The following key combinations for entering commands are available in Nero InfoTool: [Ctrl + S] Opens the Save/Print window. [Ctrl+P] Opens the Save/Print window.
Glossary 5 Glossary Advanced SCSI Programming Interface (ASPI) The advanced SCCI programming interface is the interface between the software, the SCSI (Small Computer System Interface) card and the operating system of a PC. This permits communication between the SCSI device (e.g. a SCSI scanner) and the SCSI card. However, ASPI drivers are also required for ATA, ATAPI, USB and FireWire interfaces. Firmware Firmware is software that has been installed on hardware during production (e.g.
Index 6 Index Codec Audio .............................................................. 7 Video .............................................................. 7 Conventions, manual ............................. 4 DirectX Version ........................................................... 7 Driver Hardware ........................................................ 9 Software.......................................................... 7 Key Combinations ................................
Contact 7 Contact Nero InfoTool is a Nero AG product. Nero AG Im Stoeckmaedle 13 Internet: www.nero.com 76307 Karlsbad Help: http://support.nero.com Germany Fax: +49 724 892 8499 330 N Brand Blvd Suite 800 Internet: www.nero.com Glendale, CA 91203-2335 Help: http://support.nero.com USA Fax: (818) 956 7094 E-mail: US-CustomerSupport@nero.com Rover Center-kita 8F-B, 1-2-2 Nakagawa-chuou Tsuzuki-ku Internet: www.nero.com Yokohama, Kanagawa Help: http://support.nero.com Nero Inc.