User Guide

signal coming in and there is no way of pausing, rewinding/fast forwarding or re-
starting the video signal.
'VCR' Mode
In 'VCR' mode, the video already exists on tape (or another medium). To capture
that video you need to insert the tape into your video device and play it back. You
can also rewind/fast forward through the whole tape to play back specific video
scenes.
Step 3: After the device has been selected, please decide which hard drive and
folder where you would like to save your video capture to, and enter a suitable
name. If you are happy with the default settings for name and location, you can just
leave the entry as it is.
NOTE: Capturing video requires a lot of drive space. Please make sure that you
have enough drive space to capture all your video. Capturing video from a capture
card requires about 3-30MB of hard disk space per second depending on the
resolution and the data format of your video. DV capturing via a Firewire card
(IEEE 1394) requires about 3.6 MB of hard disk space per second.
Depending on whether your selected device is in Camera or VCR mode, certain
control buttons will be available and others will not.
Button function
Play
Stop
Record
Rewind
Fast forward
Full picture
Capture timer
Next channel
Previus channel
If your device is in 'Camera' mode, you can preview the current video in the
preview monitor.
NeroVision Express 3 Capturing Video from DV cameras and other external video devices • 25