User Guide

If your DV device is in 'VCR' mode, you can use the buttons to control the tape. In
addition, by selecting these buttons, you can move the video to where you would
like to start capturing.
To start captures from an analog device, you must start the play back from the
video source. You will see the current scene in the preview monitor.
Step 4: When you are ready to capture your video, please click on the 'Record'
button
and you will see the picture you are recording displayed in NeroVision
Express 3.
Step 5: You can finish capturing video at any time by clicking the 'stop' button
.
NeroVision Express 3 Capturing Video from DV cameras and other external video devices • 26