User manual

Encoding Video Files

Nero Recode

the source, a 1:1 copy is made. If you have removed video content,

then Nero Recode increases the quality of the output video (video bit

rate) automatically to fit to the selected target size.

If this entry is selected, the editable drop-down menu Fit to target is

available.

Drop-down menu

entry

Custom

Allows you to manually adjust the video quality.

The video quality can be adjusted in the Video Quality area.

Drop-down menu

entries

Very good / Good /

Moderate / Low

Chooses the quality factor

. The quality factor is also indicated by the

quality slider in the Video Quality area.

Not available for the DVD profile.

The following editable drop-down menus are available for recoding DVD-Video to DVD-

Video:

Editable drop-down

Fit to target

Defines the target size:

4403 (DVD5): Content fits onto a DVD5 with 4.7 GB (4403 MB)

8089 (DVD9): Content fits onto a DVD9 with 8.5 GB (8089 MB)

You can also enter a custom value in MB for the target size.

Note that it is not in every case possible to achieve the target size as

the video cannot compressed any more and you have to deselect

titles, audio or subtitles to achieve your wished target size.

If the desired target size is too large to be burned on a DVD, we

recommend that you save the resulting DVD structure to hard drive

(Target drop-down menu > Save to hard drive) and play it from the

hard drive with Nero Kwik Media, for example.

This drop-down menu is only available, if the entry Fit to target is

selected in the Quality drop-down menu.