Operation Manual

Options
Nero Recode
68
9.6 Disc Options
On the Disc tab, you can define settings regarding disc burning.
The following options are available in the Default disc label area:
Input field
Default disc label if
no title was found
Defines a default disc label used for the disc if no title has been
detected.
This option applies only to DVD burning.
The following options are available in the Burning area:
Check box
Eject disc after
burning
Enables the option that your disc is ejected when the burn process is
finished.
Check box
Offer to save log
file after burning
Opens a window to save the log file when the burn process is
finished. You can specify the storage location for the log file here.
The log file is saved in TXT format.
The following options are available in the DVD area:
Check box
Allow 16-bit
Unicode for the
volume label
Relaxes limitations on the use of character sets.
Nero Recode does not use characters from languages like Japanese
or Korean, which have a 16-bit Unicode character set that does not
comply with DVD-Video requirements.
Note that the DVD might not be playable with older DVD players.
Check box
Remove P-UOPs
Made locked areas of a DVD accessible when a DVD-Video is
recoded.
For example, if the original DVD contains an area that cannot be
skipped, you can use Nero Recode to remove the block so you can
skip or fast forward through that part.
Check box
Remove layer
break
Removes the layer break.
If the original DVD consists of two layers, there is a command on the
DVD to freeze the image briefly to allow the laser to switch from the
first layer to the second. When Nero Recode is used to recode a
DVD-Video to a DVD with just one layer, this command is redundant
and can be removed.