Operation Manual

3
LOADING PRODUCTS
1. Open the front door.
2. Close the powder chute and remove the
canister, if desired you can lift the lid of the
machine for easier access to the canister.
3. Before opening agitate the
canister to force all remaining
powder down the delivery screw.
4. Fill the
selected canister
with powder
until about 1cm
from the top.
5. Fill all the
other canisters
with powder
until about 1cm
from the top.
WASH HANDS THOROUGHLY WITH WATER AND SOAP BEFORE
HANDLING THE MACHINE AND THE PRODUCTS. ONLY USE POTABLE
WATER TO CLEAN AND FILL THE MACHINE.
6. Close canister with lid.
7. Shake gently to equalize.
5