Operation Manual

DISPENSING A DRINK

WARNING:

Never remove the cup or place your hands in the dispensing area during preparation!

NOTE: For advice on best practices for water safety/quality and hardness, please refer to

the NESTLÉ PROFESSIONAL Water Management Tool.

If selection button 8 is defined as a “pre-selection” button then 14 beverage choices will

be available rather than 8.

1. Place a cup exactly in the

centre of the grid or on the

espresso cup stand for espresso.

2. Select a drink by pushing a

selection button.

3. The desired selection button

will remain ON and all other

buttons will switch OFF.

4. The dispensing area will be

illuminated by a flashing light

and the display will show the

name of your chosen drink.

When dispensing has finished

all selection buttons will light up

and the dispense area light will

remain ON.

5. When the display reads

‘remove cup please’, remove the

cup and enjoy your drink.

THIS MACHINE SHOULD ONLY BE USED WITH POTABLE WATER

OR BOTTLED WATER TO ENSURE CONSISTENCY AND BEVERAGE

QUALITY.