Use and Care Manual

ManualsBrandsNesco ManualsHousehold Appliance3-Cup Food Processor in Black

English

FEATURES

BEFORE FIRST USE

1. Read and understand all instrucons and keep for future reference.

2. Remove all packaging and labels.

3. Clean all parts, except Base, following the instrucons in the ‘Care and Cleaning ’ secon.

CAUTION: BE CAREFUL WHEN HANDLING THE SHREDDING DISC, BLADES ARE VERY

SHARP.

4. Wipe the Base with a damp cloth. WARNING: NEVER IMMERSE THE BASE IN WATER OR

ANY OTHER LIQUID.

OPERATION

The Food Processor can be used for mincing meat, slicing or shredding vegetables and herbs.

WARNING: THE LOCKING COVER IS A SAFETY FEATURE THAT ALLOWS THE PRODUCT

TO OPERATE ONLY WHEN THE COVER IS PROPERLY LOCKED INTO PLACE. DO NOT

ATTEMPT TO DEFEAT THE SAFETY PURPOSE OF THE LOCKING COVER.

NOTICE: To avoid damage to the disc and blades do not use the appliance for grinding hard

substances such a coee beans, frozen foods or ice.

Mincing:

1. Rotate the control knob to “0” for “OFF”.

2. Posion the bowl onto the base aligning the handle with the slot in

the base. Then turn the bowl counterclockwise unl it locks into place

(FIG. 1). NOTE: The unit will not operate unless the bowl is properly

locked into place.

3. Place the chopping blade over the stem inside the

bowl (FIG. 2). CAUTION: TO AVOID A CUTTING

HAZARD, ALWAYS HOLD THE CHOPPING BLADE BY

THE SHAFT AND NOT THE BLADES.

4. Place the cover onto the bowl, posioning the tab on

the cover to the right of the handle. Turn the cover

counterclockwise unl the tab slides into the groove

under the handle and locks into posion (FIG 3).

5. Be sure the control knob is in the “0” posion and

FIG. 2

FIG. 3

FIG. 1

(1) PUSH ROD - Pushes food items safely through

the feed chute to help process food.

(2) FEED CHUTE - Opening for the food to be fed

into the shredding/slicing disc.

(3) COVER - Must be properly locked onto the bowl

before operang the appliance.

(4) SLICING/SHREDDING DISC - Use for slicing or

shredding desired foods.

(5) DISC SHAFT - Use with slicing/shredding disc.

(6) BOWL - Contains the processed foods.

(7) CHOPPING BLADE - Chops foods into small pieces.

(8) CONTROL KNOB - Select “O” for O, “1” Low

speed, “2” High speed. and hold “P” for Pulsing.

(9) BASE - Encloses the electrical items and supports

the bowl. NEVER IMMERSE IN ANY LIQUIDS.