TROUBLESHOOTING GUIDE:
How do I reset my Welcome Code? Each SmartThings Hub is designated a unique six-character Welcome Code that must be entered to activate the Hub. The Welcome Code is packaged with the Hub and located on a card under the Hub's tray in the box.
2. Tap Add Thing 3. Tap Connect New Device OR: 1. Tap My Home 2. Tap the plus icon 3. Tap Add a new: Thing 4. Tap Connect New Device You can also explore and connect third-party devices that work with SmartThings, or look for a specific device you want to connect: 1. Tap Marketplace 2. Under Things, tap a category (e.g., SmartThings Recommends, Safety & Security, Health & Fitness, etc.) 3. Tap a device category (e.g., Open/Closed Sensors, Motion Sensors, Switches & Dimmers, Light Bulbs, etc.
5. Tap Remove 6. Confirm removal (this cannot be undone) Tip: When connecting/including ZigBee and Z-Wave devices, start with the powered devices (repeaters) nearest the Hub and then work your way out. Next, connect battery- How to set up the Hub New users: If you are a new user and need to set up your account, your Hub, and your entire SmartThings setup, read our Getting Started guide (/hc/enus/ articles/205380634). Existing users: Set up a new Hub by creating a new Location: 1. Tap the menu 2.
The Hub has a range of about 50 feet (depending on your home’s layout and construction), so place the Hub centrally, where it can reach the most smart devices. Read this blog post all about wireless range and repeaters (http://blog.smartthings.com/iot101/a-guide-to-wireless-range-repeaters/). What do the Hub’s LED colors mean? (https://smartthings.com) 4/26/2016 How to set up the Hub – SmartThings Support https://support.smartthings.
