N90/N9 Art. Nr.
JURA N90/N9 English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 – 22 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.jura.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig.
5678 Description of machine: 9 10 1. Water tank filling level indicator 2. Water tank with handle 3. Display dialogue system / control panel 4. ON/OFF key 5. Draw-off key small cup (arrow key) 6. Draw-off key large cup 3 7. Steam selection key (arrow key) 8. Programming key 9. Hot water / steam valve (Fig.3/4) 10. Shackle 2 11 1 12/13 14 11. Coffee spout 12. Replaceable steam / frothing jet (Fig. 7) 15 13. Replaceable hot water jet 14. Capsule container 15. Drip grate 16.
Contents JURA NESPRESSO N90/N9 1. Description of the machine................................page 2. Safety information ..........................................page 2.1 Warning ..............................................page 2.2 Precautions ..........................................page 2.2 Power switch ........................................page 3. First steps.....................................................page 3.1 Check the mains voltage ..........................page 3.2 Check electrical fuse..
Important information 2. Safety information Thank you very much for purchasing this NESPRESSO coffee machine. Before using your new machine for the first time, carefully read this operating manual and keep it for future reference. 2.1 Warning Should you need more information or if you meet with particular problems not specified in these operating instructions in sufficient detail, either contact us directly or contact your local authorized dealer.
2.3 Power switch Actuate the power switch (18) on your NESPRESSO N90/N9 before using the machine for the first time. We recommend that you switch off your NESPRESSO N90/N9 with the power switch (18) if you intend not to use the machine for longer periods of time (e.g.during holidays) To ensure perfect operation, please switch the ON/OFF key on your NESPRESSO N90/N9 to standby mode. Then switch the machine off with the power switch (18). 3. First steps 3.
The displayed information means the following: WATER HARDNESS — Water hardness function switched off WATER German water hardness degree 1 to 7° HARDNESS 1 French Water hardness degree 1.79 – 12.53° WATER German water hardness degree 8 to 15° HARDNESS 2 French Water hardness degree 14.32 – 26.85° WATER German water hardness degree 16 to 23° HARDNESS 3 French Water hardness degree 28.64 – 41.17° WATER German water hardness degree 24 to 30° HARDNESS 4 French Water hardness degree 42.96 – 53.
RINSING READY Remove the cartridge holder from the water tank. Carefully install the filter cartridge and the cartridge holder in the water tank. Move back the cartridge holder until it engages audibly (Fig. 12). Fill the water tank with cold, fresh tap water and install it again. Press the programming key until the machine switches over to programming mode. FILTER Press the programming key to activate the programming step.
RINSE – PRESS DRAW-OFF KEY Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP). RINSING READY 8. Drawing off espresso Use the ON/OFF key to switch on the machine. MACHINE HEATING RINSE – PRESS DRAW-OFF KEY Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP). RINSING READY Open the cover and install a capsule (Fig. 5). COVER / CLOSE Close the cover again.
10. Drawing off steam Steam can be used for heating liquids and frothing milk for cappuccino. Make sure that the steam / frothing jet (12) is pushed upwards when liquids are heated. Push down the frothing aid (Fig. 7) to froth liquids. If you do not draw off steam within 1 minute, steam drawoff mode is deactivated. During operation, the hot water / steam jet may heat up. However, there is no danger of burns. Install the steam / frothing jet (Fig.7) to obtain a perfect result.
.2 Drawing off cappuccino using the Professional Cappuccino Frother To draw off frothed milk, you must activate the steam draw-off mode first (see Chapter 10 “Drawing off steam”.) Turn the selector valve (1) (Fig. 8) to area (2) to draw off frothed milk. Now draw off frothed milk by turning the hot water / steam valve to Hot Water / Steam (Fig. 4). To draw off coffee again, you must activate Coffee Ready mode first (see Chapter 11 “Returning to Coffee Ready”) Turn the selector switch (1) (Fig.
15.3 Programming the steam portion Use the ON/OFF key to switch on the machine. MACHINE HEATING RINSE – PRESS DRAW-OFF KEY Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP). RINSING READY Press the programming key until the machine switches over to programming mode. FILTER Press the arrow keys a number of times until the following message appears: STEAM Press the programming key to activate the programming step. 20 SEC.
READY Press the programming key until the machine switches over to programming mode. FILTER Press the arrow keys a number of times until the following message appears: TIME Press the programming key to activate the programming step. CLOCK Press the programming key to activate the hour setting dialog. —:— Use the arrow keys to adjust the hours. Press programming key to save the hour settings and activate the minutes setting dialog.
.7 Programming the automatic switch-off time You can programme your coffee machine such that it will switch off automatically after a certain time. You can programme the switch-off time in a range between 0.5 and 8 hours, or select —:— (i.e. function switched off). Use the ON/OFF key to switch on the machine. MACHINE HEATING RINSE – PRESS DRAW-OFF KEY Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP).
15.9 Number of de-scaling operations Use the ON/OFF key to switch on the machine. MACHINE HEATING RINSE – PRESS DRAW-OFF KEY Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP). RINSING READY Press the programming key until the machine switches over to programming mode. FILTER Press the arrow keys a number of times until the following message appears: DECALC. Press the programming key to activate the programming step. .......
16.2 Emptying the tray 16.5 General cleaning instructions TRAY / EMPTY If this message appears on the display, you can no longer draw off espresso. You must empty the capsule container first. Carefully take out the drip tray and the capsule container, it is filled with water. NO / TRAY Empty the drip tray and the capsule container and install it in the machine again. READY Never use scrapers, abrasive cloths, sponges or caustic chemicals for cleaning.
If applicable, remove the Professional Cappuccino Frother (optional accessories) before starting the de-scaling operation. If acidic de-scaling agents are used, remove any splashes and drops from sensitive surfaces, in particular surfaces made of natural stone and wood, alternatively take appropriate preventive measures. In any case wait until the de-scaling agent is used up and the tank is empty. Never refill de-scaling agent. SCALED / READY Use the ON/OFF key to switch off the machine.
18. Disposal Please return the machine to your local dealer, the service shop or to JURA for proper disposal. 19. Tips for perfect coffee Preheating cups You can preheat the cups using hot water or steam. The smaller the coffee you want to draw off, the more important preheating is Sugar and cream Stirring coffee/tea will result in heat being released. Adding refrigerated cream or milk will reduce the temperature of the coffee significantly.
. Messages Cause Remedy WATER / REFILL Water tank is empty. Water level indicator jammed Tank calcified; water levelindicator jammed Refill water Empty tank, rinse and install again Remove tank, de-scale, rinse thoroughly, fill and install it again TRAY / EMPTY Capsule container full Message does not disappear after the tank was emptied Take out drip tray and capsule container, Empty container and tray and install it again Container was removed for less than 8 sec. Take out tray for approx. 10 sec.
. Problems Problem Cause Remedy Coffee only drips from the coffee spout Pyramid plate soiled by coffee powder residues Start draw-off opeation without capsule (rinse) Coffee temperature too low Machine calcified De-scale according to Chapter 17 first coffee draw-off operation after cold start Program automatic switch-on time of machine Frothing aid blocked Clean frothing aid (Chapter 16.
. Legal information 23. Technical Data These operating instructions contain all the information required for using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during maintenance. These operating instructions cannot cover any conceivable application. The machine was designed for private household use.