User's Manual

5
SPECIAL FUNCTIONS
Your SmartLink unit may have been programmed with one or more special
features by your installer,
these are described below, check with your
Monitoring Company if you have any queries about these or other features.
OVER DUE TIMER (PILL TIMER)
Your SmartLink unit can be programmed to produce regular warning beeps such as a
Medication reminder.
When the Over Due Timer is active it will be pre-
set by your Installer to provide
warning beeps and flash the HELP (RED) BUTTON for 10 minutes as a reminder to
take your Medication. You can stop the warning by pressing the CANCEL (GREEN)
BUTTON while the warning is happening.
NOTE: There is no Help message sent to your Control Centre, the warning is a
reminder for you only.
If you do not press the CANCEL (GREEN) BUTTON while the warning is sounding
(10 minutes) the Over Due Timer will de-activate and it will not re-
start until the
CANCEL (GREEN) BUTTON is pressed again.
You can use this as a useful feature if you wish to change the timer to commence at a
different time. For example
simply press the CANCEL (GREEN) BUTTON at
4pm to have the Over Due Timer warning soun
d every day at 4 o’clock in the
afternoon.
If you wish to change the timer to a different interval e.g. every week, then your
Control Centre may be able to change this time over the phone or your Installer can
change it for you.
INACTIVITY MONITOR
Your Sma
rtLink unit may have been programmed by your Installer to ensure
that you have not had an accident and are unable to move and you do not have a
Pendant with you to call for Help.
The Inactivity Monitor, after a fixed period of time without any activity, wi
ll
automatically send a Help message to your Control Centre. The SmartLink unit
will produce warning beeps and flash the HELP (RED) BUTTON.