User's Manual

6
DISPLAYS AND WARNINGS
HELP (RED) BUTTON FLASHING QUICKLY WHILE BEEPING
Your SmartLink unit is about to send a Help message to your Control Centre.
HELP (RED) BUTTON FLASHING SLOWLY
Your SmartLink unit has sent a Help message to your Control Centre and is waiting to
send the I’m O.K message. The CANCEL (GREEN) BUTTON will need to be
pressed to send the I’m O.K message.
FAULT DISPLAYS
MAINS ON LIGHT FLASHING
AC Power Fail – Check and make sure that the MAINS Power Pack
is plugged in and turned ON at the Power Point.
BATTERY LOW LIGHT FLASHING
Power has been off for too long and Battery is Low or Faulty.
Contact your Installer or Control Centre.
TO IS ON THE DISPLAY
Pendant Low Battery – Contact your Installer or Control Centre.
TO IS ON THE DISPLAY
Detector Low Battery - Contact your Installer or Control Centre.
IS ON THE DISPLAY
The SmartLink unit failed to send a message to your Control
Centre – Check and make sure that the telephone lead is plugged in
and all normal telephones are working.
IS ON THE DISPLAY
The telephone line has failed – Check and make sure that the
telephone lead is plugged in and all normal telephones are working.
(SmartLink unit will also beep for 25 seconds).