Learning Thermostat Installation Guide
WE TAKE YOUR PRIVACY SERIOUSLY We’re committed to being open and honest about how we use data. We’ll always ask for permission before sharing personally identifiable information like your email address, and we work hard to keep your data safe. To learn more about our Privacy Policy, go to nest.
Compatibility Based on Nest’s online compatibility checker data, the Nest Thermostat works with most 24V systems, including gas, electric, oil, forced air, variable speed, heat pump and radiant.
In the box Display Base Screwdriver Wall screws Optional trim plate Optional steel plate Optional steel plate screws
1. Switch off power 2. Remove cover This protects you and avoids blowing a fuse in your equipment. Adjust the temperature on your old thermostat to make sure your system is off. Some covers pop off, while others need to be unscrewed. Breaker box Switch 3. Check your system 4. Remove any jumper wires If your old thermostat is labeled 120V or 240V or has thick wires with wire nuts, your system is high voltage. Not sure? Contact support. Jumper wires are short wires between two connectors.
5. Label wires Peel off the labels below and attach them to the thermostat’s matching wires. Use the white labels for any W3, E, HUM or DEHUM wires. The * connector can only connect to one of these wires. See two names for each connector on your old thermostat’s backplate? Visit nest.com/2labels for help. Two labels Tip: Take a picture of the wires on your old thermostat to help you remember. 6.
Optional in most homes Use trim plate if needed You can cover up holes or marks left by your old thermostat with the optional trim plate. Snap the base and trim plate together, then screw them to the wall. You’ll find the trim plate in the bottom of the box. Optional in most homes Mounting on an electrical box Electrical boxes aren’t common, but if you have one, secure the steel plate to the electrical box with two of the short steel plate screws. Insert the screws into the long slots on the steel plate.
. Attach the Nest base 9. Connect wires Pull the wires through the center of the base, then attach it to the wall with the screws. After all the wires are securely connected, push them down to make sure they’re flush with the base. 3/8 in The exposed wire should be straight. 10. Attach the display 11. Switch the power back on Press the display onto the base until it clicks.
12. Setup and Nest Account The Nest Thermostat will turn on and walk you through setup. Just turn the ring and press to select. During setup, you can connect the thermostat to Wi-Fi. Go to nest.com/account or download the Nest app to create a Nest Account. The app will show you how to connect your Nest Account and thermostat. Remember, you can download the free Nest app from the App Store® or Google Play.™ Weather data is provided by The Weather Channel.
Nest Labs, Inc. Limited Warranty Learning Thermostat For more information, visit nest.com Need help? Contact us at nest.com/support For FCC Compliance Statement, visit nest.com/legal/fcc-compliance-notice THIS LIMITED WARRANTY CONTAINS IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS THAT MAY APPLY TO YOU. 1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Nest Labs, Inc.
if it determines, in its reasonable discretion after examination of the returned Product, that the Product is an Ineligible Product (defined below). Nest Labs will bear all costs of return shipping to owner and will reimburse any shipping costs incurred by the owner, except with respect to any Ineligible Product, for which owner will bear all shipping costs. 4.
064-00011-US-B
Configurez le capteur avec l’application Nest. Configúralo con la app de Nest. Set up with the Nest app. Open the Nest app. Tap the gear icon. Add the Nest Temperature Sensor. Ouvrez l’application Nest. Appuyez sur la roue dentée. Ajoutez le Nest Temperature Sensor. Abre la app de Nest. Toca la rueda dentada. Agrega el Nest Temperature Sensor. nest.com/setup/tempsensor nest.com/support nest.com/setup/tempsensor nest.