ASSEMBLY INSTRUCTION Sunbed 220cm WF198979AAA; WF198980AAA WF198981AAA; WF198982AAA Notice: 1. 2. 3. 4. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. Place the item on a flat ground to adjust and make sure it remains stable. Tighten up all screws with tools gradually. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5.
PART LIST A2 A1 Iron bar (1pc) Iron bar (1pc) A4 A3 B1 B2 Iron bar (1pc) Iron bar (1pc) B3 B4 C1 C3 C4 Iron bar (1pc) Iron bar (1pc) E Iron bar (1pc) Iron bar (1pc) D3 D2 D4 Iron bar (1pc) Iron bar (1pc) Iron bar (1pc) D1 Iron bar (1pc) Iron bar (1pc) Iron bar (1pc) C2 Iron bar (1pc) Iron bar (1pc) F Right backrest (1pc) Middle backrest (1pc) 02 / 12
PART LIST H G Bracing frame (2pcs) J I Left backrest (1pc) K Bracing frame (2pcs) M L Bracing frame (2pcs) O Bracing frame (2pcs) Q Seat base small(2pcs) S Bracing frame (1pc) Seat base (2pcs) U Cloth umbrella (1pc) Stool (1pc) Bracing frame (1pc) W Cushion (1pc) Seat base (2pcs) R T V Bracing frame (2pcs) Bracing frame (4pcs) N P Bracing frame (2pcs) X Cushion (2pcs) Cushion (1pc) 03 / 12
PART LIST Z Y Cushion (2pcs) Pillow (3pcs) 04 / 12
HARDWARE 3 2 1 Bolt M6 X 20 24 + 2 pcs (extra 2pcs) 4 48 + 3pcs (extra 3pcs) Ø2 x 6 Washer Ø6 x 14 (7pcs) Eru M6 (8pcs) (16pcs) 9 8 Connector plastic Screws M6 X 12 (7pcs) (12pcs) 10 (8pcs) 6 5 7 Bolt M6 X 25 Bolt M6 X 30 Allen (2pcs) 11 Washer Ø6 X 16 X 1 (2pcs) (8pcs) 05 / 12
Step 1: Connect right backrest (E),left backrest (H) and middle backrest (F) with bolt (1) ,detail (10) and detail(4). 1 1 4 10 F 6 1 1 H F 1 10 1 10 E H 4 1 1 *8 4 *2 10 *2 E*1 F*1 Step 2: 4 1 1 1 H*1 Connect part from Step 1 and seat base (O), seat base (Q) with bolt(1),detail (4).
Step 3: Connect part from Step 2 and bracing frame (I), bracing frame (J) with bolt(1), bolt (2) and detail (4). 4 6 F H E Q O 1 1 4 2 2 2 2 2 2 J I 1 *2 4 *1 I *1 2 *6 Step 4: J *1 Connect seat base small (P), bracing frame (M), bracing frame (N), bracing frame (L) and bracing frame (G) with bolt (2).
Step 5: Connect seat base (O) ,2pcs bracing frame (K) , bracing frame (I) and bracing frame (S) with bolt(1), bolt (2) and detail (4). 4 6 K K 2 2 2 2 I 2 2 S 2 2 4 2 1 1 2 O 2 O I S K K 1 *2 2 *11 4 *1 I *1 K*2 O *1 S *1 Step 6: Connect seat base (Q) ,2pcs bracing frame (K) , bracing frame (J) and bracing frame (R) with bolt(1), bolt (2) and detail (4).
Step 7: Connect iron bar (A1) , iron bar (A2) , iron bar (A3 ) and iron bar (A4) with screws (7) Part D A2 7 A3 7 7 A1 A4 A2 7 A1 7 *3 A1*1 A2*1 A3*1 A4*1 Step 8: Connect iron bar (B1) , iron bar (B2) , iron bar (B3 ) and iron bar (B4) with screws (7) B3 7 B2 7 Part E 7 B4 B1 7 B3 B2 7 *3 B1*1 B2*1 B3*1 B4*1 Step 9: Connect iron bar (C1) , iron bar (C2) , iron bar (C3 ) and iron bar (C4) 9 with screws 9 (7) 7 C2 C3 7 7 Part F C1 C4 7 C3 C4 7 *3 C1*1 C2*1 C3*1 C4*1 09 / 12
Step 10: Connect iron bar (D1) , iron bar (D2) , iron bar (D3 ) and iron bar (D4) with screws (7) Part G D2 7 D3 7 7 D1 D4 7 D3 D4 7 *3 D1*1 D2*1 D3*1 D4*1 Step 11: Thread the detail of Step (7), Step (8), Step (9) , Step (10) into the cloth umbrella (U).
Step 12: Connect part from Step (3) and Step (11) with bolt (3),washer (5) , eru (6) and washer (11) Part D Part E x2 Part F Part G 5 11 3 5 3 Part D 3 6 6 6 Outside 6 Part E 5 3 Inside Part F Part G Part A T H Part B Part C Part A 3 *8 5 *16 6 *8 11 *8 E *1 H*1 T*1 Step 13: Connect part from Step (3) and Step (11) with bolt (3),washer (5) , eru (6) and washer (11) Outside Part D Part E Part F Part G E Inside 11 / 12
Step 14: Connect details together by Connector plastic (8). 8 8 8 8 8 8 8 8 8 Step 15: Put on sunbed seat cushions (V) (X) (W) (Y) and pillow (Z) to complete sunbed.
