Instructions / Assembly

01/11
ASSEMBLY INSTRUCTION
RATTAN SOFA SET
Notice
1. 50% Tighten before fixings all screws, Allen
wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make
sure it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during
assembly, please loosen all all the other screws to
50% and continue the assembly process.
5. If the item is not stable, please loosen all the
screws, adjust it on a flat ground and tighten up all
screws again.
6. Note: If one or more screws are fully tightened
during assembly, chances are the others will not
be aligned with holes. In addition, all the holes are
disigned to be relatively larger to provide more
space for the adjustment of the screws.
WF 285791; WF 285792; WF 285793; WF 285794

Summary of content (11 pages)