Installation Guide
NET-DYN USB Dual Band (Mediatek) Installation Guide This manual is divided into three parts: Windows XP, Windows 7 / 8 / 8.1 /10, and Mac 1 .Windows XP Please do the following steps to set up the software on your computer: Step 1. Once the wireless USB adapter has been plugged in to a USB port, the following message will appear on screen. Click “Cancel”. (See picture below please) (If it does not pop-up, skip this step) Step 2. Please insert the disc into your CD-ROM drive.
Here you have two options: “Install Driver and Mediatek WLAN Utility” or “Install Driver Only” With the WLAN Utility you will have software to manage your connections with. If you choose to only install the drivers, you will use your regular utility provided by Windows. Step 4. Once you choose which option you prefer, continue the installation wizard and finish it. Step 5: If You Chose “Install Driver Only”: Step 5a.
key and click “connect”. Then you will have internet access.
If You Chose “Install Driver and Mediatek WLAN Utility”:
Now Choose between the “Mediatek Configuration Tool” or the “Microsoft Zero Configuration Tool”. If you choose the “Mediatek Configuration tool, proceed with Step 5b. If you choose the “Microsoft Zero Configuration Tool”, you have the option to connect to the internet both ways 5a and 5b. Step 5b. Double click the Icon in the Windows system tray, which locates in the bottom-right corner of your computer screen and open the wireless networking setup page as seen in figure 1.
2. Windows 7 / 8 / 8.1 / 10 This example uses Windows 7, but if you have Win 8 or 10, the steps are the same. Step 1. Once the wireless USB adapter is plugged into a USB port, insert the CD and locate Setup.exe in the folder “windows” in the disc directory. (If you do not have a CD-ROM slot in your computer, please download the driver from netdynwifi.com) Step 2. Double click on the Setup.exe file, then choose “I accept the terms of the license agreement”. Click “Next”.
Step 3. Once you choose which option you prefer, continue the installation wizard and finish it. Step 4: If You Chose “Install Driver Only”: Step 4a.
Open the wireless networking page and enter the security key. Click the “OK” button. Then you should have internet access when you open a internet window with any browser. If You Chose “Install Driver and Mediatek WLAN Utility”: Step 4b. Double click the icon in the Windows system tray, which is located in the bottom-right hand corner of your computer screen, and click on the “Available Networks” button (See figure 1).
Click “Next “ (figure 4) at the left bottom of the page. Enter the wireless password (figure5) and click the next arrow. You will now have internet access.
Note: If there is no icon, please find it by clicking the small triangle at the bottom right of the screen. It has been hidden as following the picture shows: If you install the Mediatek WLAN Utility, you can also choose to do step 4a and you will be able to access the internet.
3. MAC OSX Step 1. Unzip the Driver for MAC OS, and then open the file “USBWireless-Install.pkg”. Open the .pkg file for the Mediatek Wireless Utility installation. Step 2. After you install the driver, you’ll have to restart your computer. Step 3. Open your Finder, and then click on “Applications”, find the “Mediatek Wireless Utility” files. Open it and click “Wireless Utility”. Step 4.
