Owner manual

Fiber Tap
5
Connecting to the Network
1. Connect Network Port A to the appropriate network device using a Duplex
LC cable.
2. Connect Network Port B to the appropriate network device using a Duplex
LC cable.
3. Verify that the Tap Network Ports are cabled in-line between two devices.
Note: ________________________________________________________________
The use of Singlemode (8.5μm), Multimode (50μm or 62.5μm), or LC cabling
is determined by the model purchased.
______________________________________________________________________
Figure 3: Connecting to the Network
To Network Device
To Network Device
A B AA BB
OUT OUT OUT OUTIN IN
LASER
CAUTION!
Splitter TapSplitter Tap
www.netoptics.com