Installation Guide for GigaBit Fiber In-Line Regeneration TapTM 800-0066-001 Doc. PUBRGNSXILU Rev.
GigaBit Fiber In-Line Regeneration Taps Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Key Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GigaBit Fiber In-Line Regeneration Taps PLEASE READ THESE LEGAL NOTICES CAREFULLY. By using a Net Optics Regeneration Tap you agree to the terms and conditions of usage set forth by Net Optics, Inc. No licenses, express or implied, are granted with respect to any of the technology described in this manual. Net Optics retains all intellectual property rights associated with the technology described in this manual. This manual is intended to assist with installing Net Optics products into your network.
GigaBit Fiber In-Line Regeneration Taps Introduction Net Optics GigaBit Fiber Regeneration Taps solve the key physical layer challenges of multi-device monitoring for GigaBit fiber networks. For a complete picture of network health, these Taps connect up to eight different network management and security devices at any single GigaBit network location.
GigaBit Fiber In-Line Regeneration Taps Key Features Passive, Secure Technology • Enables real-time, simultaneous monitoring of a single GigaBit link with up to eight monitoring devices • Provides complete full-duplex visibility at 1000 Mbps without data stream interference or introducing a point of failure • Passes all traffic (including errors) from all layers for comprehensive troubleshooting • No IP address is needed for the Tap or monitoring device, enhancing monitoring security • Redundant power en
GigaBit Fiber In-Line Regeneration Taps About This Guide Please read the guide before attempting to install GigaBit Fiber Regeneration Tap. This guide covers the following models: Part Number Description RGN-SX-IL2 2x1 GigaBit Fiber SX Regeneration Tap, 62.5/125µm RGN-50SX-IL2 RGN-SX-IL4 RGN-50SX-IL4 RGN-SX-IL8 2x1 GigaBit Fiber SX Regeneration Tap, 50µm 4x1 GigaBit Fiber SX Regeneration Tap, 62.5/125µm 4x1 GigaBit Fiber SX Regeneration Tap, 50µm 8x1 GigaBit Fiber SX Regeneration Tap, 62.
GigaBit Fiber In-Line Regeneration Taps Power LEDs Network Ports Monitor Ports 1 2 A B Regeneration Tap™ Network Monitor 1 B 2 LASER A A CAUTION! LINK B www.netoptics.com SC Duplex Interface (angled) x2 Link Status LED's SC Duplex Interface (angled) x2 Product Diagrams 1 2 3 4 A B Regeneration Tap™ Network Monitor 1 B 2 LASER A A CAUTION! LINK B www.netoptics.
GigaBit Fiber In-Line Regeneration Taps Connecting to the Network 1. Connect Network Port A to the appropriate switch, server or router device using a duplex SC fiber cable. 2. Connect Network Port B to the appropriate switch, server or router device using a duplex SC fiber cable. 3. Verify that the GigaBit Fiber Regeneration Tap Network Ports are cabled in-line between two devices. 1 2 3 4 A B Regeneration Tap™ Network Monitor 1 B 2 LASER A A CAUTION! LINK B www.netoptics.
GigaBit Fiber In-Line Regeneration Taps Connecting to the Monitoring Devices 1. Supply power to the Tap using the power supply adapter included with the unit. Verify that the power LED illuminates. Note: ________________________________________________________________ The second power supply is available to support the flow of traffic to the monitoring device should the first power supply fail. If the first power supply is unavailable, the second power supply supplies all power for the Tap.
GigaBit Fiber In-Line Regeneration Taps Specifications Environment Operating Temperature: 0˚C to 40˚C Storage Temperature: -10˚C to 70˚C Relative Humidity: 10% min, 95% max, non-condensing Power Power Supply Input: 100-240 VAC, 0.5A, 47-63Hz. Input: -48V DC typical, -36V DC min, -75V DC max Mechanical Dimensions: 1.75” high x 10.5” deep x 17” wide Certifications Fully RoHS compliant Optical Interface Transceivers: Class I, eye-safe, laser emitter type.
GigaBit Fiber In-Line Regeneration Taps Optical Receiver Input Sensitivity: -3 dB min, -20 dB max Connectors RGN-SX-IL2 and RGN-50SX-IL2 models: (2) Duplex SC Multimode connectors (monitor ports) (2) Duplex SC Multimode connectors (network ports) RGN-SX-IL4 and RGN-50SX-IL4 models: (4) Duplex SC Multimode connectors (monitor ports) (2) Duplex SC Multimode connectors (network ports) RGN-SX-IL8 and RGN-50SX-IL8 models: (8) Duplex SC Multimode connectors (monitor ports) (2) Duplex SC Multimode connectors (net
GigaBit Fiber In-Line Regeneration Taps Limitations on Warranty and Liability Net Optics offers a limited warranty for all its products. IN NO EVENT SHALL NET OPTICS, INC. BE LIABLE FOR ANY DAMAGES INCURRED BY THE USE OF THE PRODUCTS (INCLUDING BOTH HARDWARE AND SOFTWARE) DESCRIBED IN THIS MANUAL, OR BY ANY DEFECT OR INACCURACY IN THIS MANUAL ITSELF.
GigaBit Fiber In-Line Regeneration Taps Notes: 10
www.netoptics.com © 2009 by Net Optics, Inc. All Rights Reserved.
