Owner manual

GigaBit Fiber Port Aggregator Tap
6
Connecting to the Network
Optical connections are extremely sensitive to contaminants. Make sure all
optical surfaces are clean before connecting.
To connect to the Network Ports:
1. Remove protective plugs.
2. Connect Network Port A to the appropriate network device using a Duplex
LC cable.
3. Connect Network Port B to the appropriate network device using a Duplex
LC cable.
4. Verify that the Tap Network Ports are cabled in-line between two devices.
Figure 4: Connecting to the Network
To Span Port
To Span Port
www.netoptics.com
Port Aggregator
1
Network Monitor
2
A B
1
2
2
1
B
A
LINK