User guide

Multi-Station Power Supply

General Description

The AC version of the product accepts power from two AC line sources. The

unit can operate from either one or both AC power sources. The power inputs

are “universal,” accepting 85-264 VAC, 47-63 Hz.

The DC version of the product accepts power from two DC sources. The unit

can operate from either one or both DC power sources. The input voltages

can be from -32 to -72VDC amd is compatible with most telecommunications

equipment rooms.

For both AC and DC models, the unit delivers a nominal 12VDC output on

24 leads terminated with barrel connectors. It is designed to be used with the

following Net Optics products (Taps):

• TP-CU 10/100BaseT Tap

• TP-CU3 10/100/1000BaseT Tap

• PA-CU 10/100BaseT Port Aggregator Tap

• PA-CU-AR 10/100BaseT Port Aggregator Tap, AR

• PAD-CU 10/100BaseT Dual Port Aggregator Tap

• PAD4-CU-AR 10/100BaseT Dual Port Aggregator Tap, AR

• CVT-CU/SX GigaBit TX to SX Tap

• CVT-TX/LX GigaBit TX to LX Tap

• CVT-SX/TX GigaBit SX to TX Tap

• CVT-LX/TX GigaBit LX to TX Tap

• PAD-SX4 GigaBit SX Dual Port Aggregator Tap, 60:40

• PAD-SX5 GigaBit SX Dual Port Aggregator Tap, 50:50

• PAD-GCU GigaBit Copper Dual Port Aggregator Tap

What is In the Box

Carefully unpack the Multi-Station Power Supply and other accessories. The

product is delivered with the following:

• (1) Multi-Station Power Supply

• (2) Power cords (AC model only)

• (2) Power supply clips (AC model only)

• (1) Installation Guide for Multi-Station Power Supply (this manual)

• Extended Warranty if purchased

Check the packing slip against parts received. If any component is missing

or damaged, contact Net Optics Customer Service immediately at +1 (408)

737-7777.