Datasheet

6
Power over Ethernet (PoE) Single ended testing:
- User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with
LLDP negotiation
The following PSE PoE parameters are measured:
- Pairs used
- Received class
- PSE type
- Unloaded voltage(V)
- Loaded voltage (V) (LRAT-2000 with TruePower™)
- Unloaded power (W) (LRAT-1000)
- Loaded power (W) (LRAT-2000 with TruePower™)
Environmental
Operating Temperature 32°F to 113°F (0°C to +45°C)
NOTE: The battery will not charge if the internal temperature of the tester is above 122°F (50°C).
Operating relative
humidity (% RH without
condensation)
90% (50°F to 95°F; 10°C to 35°C)
75% (95°F to 113°F; 35°C to 45°C)
Storage temperature -4°F to 140°F (-20°C to +60°C)
Shock and vibration Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop
Safety EN 61010-1 2nd edition
Safety (LR-AT 2000 only) EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)
Altitude 4,000 m; Storage: 12,000 m
EMC IEC 61326-1: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A
LinkRunner AT Manager Soware
Supported Operating
Systems
Windows® 8.1 and Windows® 10
Minimum hardware requirement:
Processor 1 GHz or better
RAM 1 GB or more
Hard Disk 1 GB of available space
Display 1024 x 768 high color, 32-bit (recommended)
Interface USB
Certifications and Compliance
Conforms to relevant European Union directives
Conforms to relevant Australian Safety and EMC standards
Specifications continued
©2020 NetAlly. NetAlly® is a registered trademark of LinkRunner® LLC dba NetAlly. Third-party trademarks mentioned are the property of their respective owners.
LRAT-DS-20-V1
simplicity • visibility • collaboration
netally.com/products/linkrunner