Datasheet

5
Discovery – Know who and what is on your network
The LinkRunner 10G discovery app automatically discovers your network
immediately upon power-up. The discovery provides quick security and health
audits of the network devices across multiple VLANs and subnets.
Devices are classified and correlated to provide complete visibility of their
name, network addresses, VLAN, SSID, device type, and where available,
traic statistics. Engineers can name and set authorization status for devices
discovered. Discovery results can be directly uploaded to the complimentary
Link-Live Cloud Service for storage, conduct detailed analysis of devices
discovered with filter and sort tools, or export to CSV/PDF files as documentation.
LinkRunner’s discovery can be enriched by accessing SNMP MIBs of infrastructure
devices. It shows details such as device configuration summary, interface
configuration and traic detail, SSIDs supported by WLAN Controllers, and
devices directly connected to switches. Community strings entered are
concealed from view.
Discover possible security risks caused by users and others: 2nd DHCP oers
indicating possible rogue servers, unknown switches granting access to multiple
devices.
The LinkRunner 10G’s discovery automatically detects problems. It
shows possible cause(s) for each problem detected, and it has integrated
troubleshooting tools to investigate further to get to root cause.
Switch Management
Drill into switch interfaces via SNMP for additional diagnostics, including trend
graphs on utilization, errors, discards, half-duplex (HDX), RSTP, and recent
reboots.
Path Analysis
Shows the switch/router path connecting the LinkRunner 10G to an IP device
on across wired and Wi-Fi networks, and even beyond the local network, e.g.,
from the LinkRunner 10G’s test port to a server in the cloud or data center. The
LinkRunner 10G oers built-in tools to conduct further analysis of the devices
along the path: view configuration, interface traic statistics, launch Telnet or
browser, conduct port scan, ping and more.
Simple “Access-Anywhere” Remote Control
LinkRunner 10G permits a remote engineer to control the EtherScope nXG “out
of band” (using VNC) to collaborate with technicians on-site, or to troubleshoot
remotely where there is no local sta.
But connecting to distant sites via VNC on dierent networks is diicult or
impossible, particularly behind NAT firewalls. With the AllyCare-enabled web
remote control, users can instantly connect to remote units through the Link-
Live Cloud Service – anywhere in the world – for collaborative and remote
troubleshooting.
Path Analysis shows
the device & interfaces
that UDP/TCP traic
traverses
Shows the interfaces
of devices present in
path analysis
Device deti showin
VLAN, interfces, uptime,
& more with dri-down
PRODUCT SUPPORT
AllyCare-Enabled Features Deliver Advanced Troubleshooting Capabilities
The following features below are only available to customers with AllyCare support on their
LinkRunner 10G. Visit www.netally.com/support/#AllyCareSupport
Interface traic
statistics - correlated
for 24 hours to detect
intermittent events