User Manual
Table Of Contents
- Contact Us
- Introduction
- Home and Android Interface
- LinkRunner 10G Settings and Tools
- Software Management
- LinkRunner 10G Testing Applications
- AutoTest App and Profiles
- Ping/TCP Test App
- Capture App
- Discovery App
- Path Analysis App
- Performance Test App
- iPerf Test App
- Link-Live Cloud Service
- Cable Test App
- Specifications and Compliance
1. Copy the .zip file to a Micro SD card
inserted into your LinkRunner.
2. Power off your LinkRunner unit.
3. Press and hold the volume up button and
press the power button to start up the
LinkRunner in Recovery Mode. Continue
holding the volume up button until the
Recovery screen appears.
4. In Recovery Mode, use the volume buttons
to highlight “apply update from SD card,”
and press the power button to confirm the
selection.
5. Use the volume buttons to highlight the
correct update file on the Micro SD card,
and press the power button to confirm.
The LinkRunner will open the Updater, install
the Android update, and then restart with the
update installed.
After updating Android, be sure to check the
available Applications update version to
determine if an Applications update is still
required.
Software Management
107