User Manual

To customize each Profile with the required
network settings and a custom name, touch the
Profile name first, and then select the settings
icon.
NOTE: Touching the settings icon on the
main AutoTest screen (shown above) opens
the AutoTest Settings and Profile Group
screen, not the individual Profile settings.
l The default Wired Profile runs automatically
and establishes a wired link as soon as your
unit is powered on and an active Ethernet
connection is available on the top RJ-45
port.
NOTE: The default Wired Profile does not
run automatically over a fiber link. You
must touch START in AutoTest to run a
Wired Profile on a fiber connection.
Adding New Profiles
To add new test profiles to the current
AutoTest, tap the floating action button (FAB)
on the AutoTest screen.
The profile's configuration screen appears after
you select the type of profile you want to add.
AutoTest App and Profiles
136