User Manual
Table Of Contents
- Contact Us
- Introduction
- Home and Android Interface
- LinkRunner 10G Settings and Tools
- Software Management
- LinkRunner 10G Testing Applications
- AutoTest App and Profiles
- Ping/TCP Test App
- Capture App
- Discovery App
- Path Analysis App
- Performance Test App
- iPerf Test App
- Link-Live Cloud Service
- Cable Test App
- Specifications and Compliance
Received Class: Class acknowledgment
received from the switch
TruePower™ Power: Measured wattage with
load.
NOTE: The PoE card displays additional
TruePower™ results only if TruePower is
enabled in the Wired Profile PoE Settings.
Voltage
Unloaded: Measured voltage without load
TruePower™ Voltage: Measured voltage
with load
Positive: Positive PoE cable pair IDs
Negative: Negative PoE cable pair IDs
PSE Type: Switch's advertised Power
Sourcing Equipment (PSE) type. Recognized
types are 1 – 4, LTPoE++, Cisco UPOE, and
PoE Injectors. PSE supporting UPOE are clas-
sified under Type 2. If the type cannot be
determined, "1/2" is displayed.
Negotiation: Negotiation status for UPOE
and Class 4 (UPOE or LLDP)
AutoTest App and Profiles
162