User Manual
Table Of Contents
- Contact Us
- Introduction
- Home and Android Interface
- LinkRunner 10G Settings and Tools
- Software Management
- LinkRunner 10G Testing Applications
- AutoTest App and Profiles
- Ping/TCP Test App
- Capture App
- Discovery App
- Path Analysis App
- Performance Test App
- iPerf Test App
- Link-Live Cloud Service
- Cable Test App
- Specifications and Compliance
The VLAN test screen displays the real-time
traffic the LinkRunner detects on the top
VLANs. Up to nine VLANs with the highest traffic
are displayed as colored portions of the pie
chart. The table on the lower part of the VLAN
screen lists all the VLANs seen.
Switch Test Results
The results available for the Switch Test are
based on Discovery Protocol advertisements
and SNMP system group information. SNMP
forwarding table data is used to determine the
Nearest Switch. See Discovery Settings for
SNMP configuration instructions.
The Switch test card displays the Nearest
Switch and the port name. The Switch icon
remains black if the test is successful.
l If the LinkRunner does not detect any
network traffic moving through the switch
after 45 seconds, the switch icon turns
yellow.
AutoTest App and Profiles
172