User Manual
Table Of Contents
- Contact Us
- Introduction
- Home and Android Interface
- LinkRunner 10G Settings and Tools
- Software Management
- LinkRunner 10G Testing Applications
- AutoTest App and Profiles
- Ping/TCP Test App
- Capture App
- Discovery App
- Path Analysis App
- Performance Test App
- iPerf Test App
- Link-Live Cloud Service
- Cable Test App
- Specifications and Compliance
Each section represents a unique port advert-
isement as defined by protocol type and MAC
address.
The switch results screen shows the following
data fields:
Status: Time elapsed after link was established
before network traffic was received from the
switch
Nearest Switch: Name of the switch
determined to be closest to the LinkRunner
Port: Detected Port name
Description: Configured description
reported by the switch
VLAN ID: VLAN ID number (if present)
Voice VLAN ID: Voice VLAN ID number (if
present)
IP and MAC Addresses: Discovered switch
addresses
Location: Configured location reported by
the switch. This field only appears if the
LinkRunner has SNMP access to the Nearest
Switch.
AutoTest App and Profiles
175