User Manual

PoE Test
Touch the toggle button to enable or disable
the PoE test portion of the current Wired
Profile.
Powered Device Class
Touch to select a PoE class setting to match
your switch's (or PoE injector's) available class.
LinkRunner supports these classes:
l 802.3af Classes 0-3
l 802.3at PoE+ Class 4
l Cisco's UPOE, which can provide up to 51W
l 802.3bt Classes 5-8
Select the PoE Injector option if you are using
a non-IEEE injector.
NOTE: LinkRunner may not receive the total
wattage advertised by your switch or
injector because of power loss over the
cable.
NOTE: LinkRunner automatically negotiates
Cisco UPOE over LLDP, up to 51W. LLDP
must be enabled on the switch for
AutoTest App and Profiles
185