User Manual

Name: This field allows you to assign a custom
name to the test. The name appears on the
target test card in the profile.
Device Name: Enter the IP address or URL of
the target you want to test. If you enter an IP
address, the DNS lookup portion of the test
will be skipped.
IP Protocol Version: IPv4 is used by default.
Touch the field to switch between IPv4 and
IPv6.
Port: Specify the TCP port number LinkRunner
will use to connect to the target.
Timeout Threshold: This threshold controls
how long the LinkRunner waits for a response
from the target before failing the test.
TCP Connect Test Results
The TCP card shows the test name entered in
the settings and the three response times from
the target.
Touch the card to open the TCP results screen.
AutoTest App and Profiles
234