User Manual

To test the Maximum Transmission Unit (MTU)
along a route to a target, select the MTU frame
size you want to test, and set the Do Not
Fragment setting (below) to Enabled.
Interval: This setting only appears if the Ping
Protocol is selected. It controls how much time
passes between each Ping sent from the
LinkRunner. By default, Pings are sent once
every second (1 s). Tap a radio button to select
a different interval, or enter a Custom Value
between 100 and 10,000 milliseconds.
Port: This setting only appears if the TCP
Connect Protocol is selected. It indicates the
port number your LinkRunner will use to
connect to the target address for a TCP Port
Open test. If needed, touch the Port field to
open a pop-up number pad and enter a new
port number. Touch OK to save it.
Timeout Threshold: This threshold controls
how long the LinkRunner waits for a response
from the target before the test is failed.
Do Not Fragment: This setting only appears if
the Ping Protocol is selected. Touch the toggle
Ping/TCP Test App
264