User Manual
Table Of Contents
- Contact Us
- Introduction
- Home and Android Interface
- LinkRunner 10G Settings and Tools
- Software Management
- LinkRunner 10G Testing Applications
- AutoTest App and Profiles
- Ping/TCP Test App
- Capture App
- Discovery App
- Path Analysis App
- Performance Test App
- iPerf Test App
- Link-Live Cloud Service
- Cable Test App
- Specifications and Compliance
Capture Settings
The Capture app settings allow you to
designate file and slice sizes, and apply filters to
capture and analyze only certain packet types.
For example, you can set a filter to capture
only packets related to a specific application
(based on IP address and port number).
When you open Capture from Home and do not
configure any filters, all packets from the
switch are captured. The default capture saves
all the packets sent from the local switch to the
LinkRunner.
If you open the Capture app from another
NetAlly test app, Capture filters are auto-
matically applied. Filters that can be applied
from other apps include Wired IP and MAC.
The Capture settings are saved until you clear
the filters or open the app with new filters
applied.
Touch the settings icon in the Capture
screen to configure capture settings.
Capture App
271