User Manual

stops when the captured file reaches this size.
When capture is running, the capture screen
displays the current file size as data is captured.
Slice Size: Touch this field to select a specific
frame slice size or enter a custom value. The
Slice Size setting limits how much of each
packet is captured. A smaller slice size is useful
when you are interested in the packet’s header
but do not need to see all the payload data.
The default is Full Packet.
Wired Filters
All filters are disabled by default unless you
open Capture from another app. Touch the
fields below to enable and enter filter values.
MAC: Enter the MAC address of a host to
capture only packets that contain the host's
MAC address as the source or destination.
IP: Enter the IP address of a host to capture
only traffic to and from the host. You can
specify an IPv4 or IPv6 address.
VLAN: Enter a VLAN number to capture only
traffic tagged for that VLAN.
Capture App
273