User Manual
Table Of Contents
- Contact Us
- Introduction
- Home and Android Interface
- LinkRunner 10G Settings and Tools
- Software Management
- LinkRunner 10G Testing Applications
- AutoTest App and Profiles
- Ping/TCP Test App
- Capture App
- Discovery App
- Path Analysis App
- Performance Test App
- iPerf Test App
- Link-Live Cloud Service
- Cable Test App
- Specifications and Compliance
the device type and the information
LinkRunner was able to discover:
Name: Discovered hostname(s) of the device.
This section can display user-defined, DNS,
mDNS, SNMP, NetBIOS, AP, and Virtual
Machine names as discovered.
Address: Discovered IPv4, IPv6, BSSID, and/or
MAC addresses of the device. This section
displays the default (first discovered) addresses
of each type. For more addresses, select the
Addresses card when available.
Authorization: This field shows the user-
assigned Authorization status of the device.
See Assigning a Name and Authorization to
a Device.
Nearest Switch: Name or address of the switch
identified as closest to the device
Port: Physical port where the device is
connected
VLAN ID: ID of the VLAN the device is on
Protocols: Routing protocols, discovered via
packet analysis, operating on the device or
network
Discovery App
307