User Manual

A drop-down list in the IPv4 Address dialog
shows all the Test Accessories the LinkRunner
has discovered through the discovery process,
as well as any Test Accessories that are claimed
to the same Link-Live organization as your
LinkRunner.
NOTE: Clear the address field in the dialog
to see the full list of discovered Test
Accessory addresses.
Port: The default iPerf3 port number is 5201.
Tap the field to enter a different port number.
NOTE: The iPerf port number entered here
must match the port number used by your
iPerf server. If needed, consult the Test
Accessory User Guide
(NetAlly.com/products/TestAccessory).
Duration: This setting is the length of time for
one direction, Upstream or Downstream, of the
iPerf test. If the Direction setting below is set
to both Upstream/Downstream, the total test
time will be twice the value set here. Tap the
field to select a new duration or enter a custom
value. The default is 10 seconds.
iPerf Test App
420