User Manual
Table Of Contents
- Contact Us
- Introduction
- Home and Android Interface
- LinkRunner 10G Settings and Tools
- Software Management
- LinkRunner 10G Testing Applications
- AutoTest App and Profiles
- Ping/TCP Test App
- Capture App
- Discovery App
- Path Analysis App
- Performance Test App
- iPerf Test App
- Link-Live Cloud Service
- Cable Test App
- Specifications and Compliance
Back to Title and Contents
Protocol: TCP is the default protocol. Tap the
UDP selector to switch to UDP.
NOTE: iPerf tests running the TCP protocol
automatically run at the fastest rate
possible. When running a UDP protocol test,
the iPerf app attempts to run at the
selected Bandwidth.
Direction: You can run an iPerf test Upstream,
Downstream, or both. The default is Upstream
and Downstream. Touch this field to set the
test for only one direction.
Upstream and Downstream Bandwidth: These
fields only appear if the UDP Protocol is
selected. They specify the desired target
bandwidth for the iPerf Test using the UDP
protocol.
Upstream and Downstream Thresholds:
Thresholds are the values the LinkRunner uses
to grade the test as Pass or Fail. iPerf
thresholds are throughput rates. The default is
10 Mbps. Tap the threshold fields to select a
different value or enter a custom one.
iPerf Test App
421