User Manual
Table Of Contents
- Contact Us
- Introduction
- Home and Android Interface
- LinkRunner 10G Settings and Tools
- Software Management
- LinkRunner 10G Testing Applications
- AutoTest App and Profiles
- Ping/TCP Test App
- Capture App
- Discovery App
- Path Analysis App
- Performance Test App
- iPerf Test App
- Link-Live Cloud Service
- Cable Test App
- Specifications and Compliance

Test Ports
LinkRunner runs Wired AutoTests, Captures,
Discovery, and comprehensive network analyses
over the test ports.
You must run an AutoTest Wired Profile in
order to establish a link on the Wired test
ports. If the AutoTest app is not currently
open, the last Wired Profile in the profile list
runs automatically when you power on the
unit or LinkRunner detects a new copper link in
the top Wired Test Port. Wired fiber
connections must be started manually in the
AutoTest app.
NOTE: If both the top fiber and copper
ports are connected to an active network,
the LinkRunner uses the fiber link as the
Wired Test Port connection.
Wired Copper Test Port: The copper
test port is the RJ-45 port on the top of the
unit. To disable, unplug the connection.
Wired Fiber Test Port: The SFP and
fiber test port is also on the top of the unit.
To disable, unplug the connection.
General Settings and Tools
67