User Manual

function in Wired AutoTest Profile Settings to
hide the AutoTest cards that require transmit
capability. Set the AutoTest Stop After setting
to Switch. Otherwise, when Receive Only is
enabled, the Wired DHCP/Static IP test shows a
Result Code of "Interface is configured to only
receive packets," and the subsequent tests do
not run.
User-Defined MAC: This setting affects the Wired
Test Port only. Tap the toggle switch to enable
a user-defined MAC address. When enabled, an
additional User-Defined MAC field appears
under the toggle setting. Touch the lower field
to enter your desired MAC address for the
LinkRunner. When a User-Defined MAC is
enabled, (User-defined) appears next to the
MAC address on the About screen and on
relevant test result screens.
Management
These settings affect management-related
functions on the LinkRunner, including remote
access.
General Settings and Tools
76