User's Manual

Configuration setup
To add Tag to the Welcome, follow the instructions on its quick start guide, or click on "Add Tags" in
the settings menu. The app will guide you through the installation.
Do not place tag before having set it up.
1) Bump the Tag 3 times on the top of WELCOME in order to put them in accessory pairing
mode. WELCOME’s LED should turn on in a glowing green light.
2) Once the communication is established, the LED stays steady. The Tag’s LED lights up in a
steady green too.
3) Set up process is over when both LEDs turn off. Use the smartphone/tablet/computer app to
check it is successful.
4) You can now place your tag wherever you want in your home (in a 100m range around your
Welcome camera)
Powering?
Tags are powered by 2 AAA Alkaline batteries each.
Upon introducing the batteries, the light of the Tag should light up green.
3x