Operation Manual

NetBotz CCTV Adapter Pod 120

Thank you for buying this NetBotz CCTV

Adapter Pod 120. Designed for use with

NetBotz 500 and 420 appliances and a single

closed circuit television (CCTV) or other

video source, the CCTV Adapter Pod accepts

multi format S-Video and Composite Video

and features DIN, BNC and RCA input jacks.

This pod also features a USB port that enables

the pod to be tethered to the base station using

a standard USB cable. Using the CCTV

Adapter Pod, your analog video source is

digitally converted and integrated with the

NetBotz physical security solution. Streaming audio (using the pod’s integrated microphone

or an external microphone connected to the pod) is also available.

The CCTV Adapter Pod provides the following features:

• Images of up to 640x480 resolution, 24-bit color, and up to 30 frames per second (color

and resolution may be limited by video source).

• Integrated microphone, as well as a microphone jack (standard 3.5mm miniplug), which

provide the ability to monitor and capture monophonic audio from the location in which

the pod or external microphone are installed.

• Speaker/headphone jack (standard 3.5mm stereo miniplug) that can be used with

unpowered headphones or powered speakers to provide monophonic audio output.

• Door Switch Sensor jack (magnetic door switch sensor available separately)

• Camera Motion Detection.

• Activity LED, which indicates the power-on and recording status of the pod.

The CCTV Adapter Pod also includes laser-cut mounting holes on the rear of the pod that

enable you to mount the pod in a variety of locations.

Included Materials

Your NetBotz CCTV Adapter Pod 120 appliance package contains the following:

• NetBotz CCTV Adapter Pod 120

• USB Cable, 5M

• 2 docking pegs (for optional use in docking the pod to your NetBotz 500 base station)

• 2 clamp-on ferrites (for emissions compliance. Reduces radio frequency emissions from

the USB and Video Cable)

• Cable mounting kit, with adhesive backed mounts and zip strips

• Internal microphone override plug

• Audio/video recording advisory sticker

PAGE 1
NetBotz CCTV Adapter Pod 120 Thank you for buying this NetBotz CCTV Adapter Pod 120. Designed for use with NetBotz 500 and 420 appliances and a single closed circuit television (CCTV) or other video source, the CCTV Adapter Pod accepts multi format S-Video and Composite Video and features DIN, BNC and RCA input jacks. This pod also features a USB port that enables the pod to be tethered to the base station using a standard USB cable.
PAGE 2
NetBotz CCTV Adapter Pod 120 Installing the CCTV Adapter Pod 120 To install your pod, simply connect your video source to the appropriate DIN, BNC, or RCA video input jack on the pod. Then, use the USB cable to connect your pod to your NetBotz 500 or 420 appliance, or to a USB hub that is connected to the NetBotz appliance.
PAGE 3
NetBotz CCTV Adapter Pod 120 Your video source should now appear in your Advanced View Cameras pane. Once configured, you can use the video source in the same ways in which you use NetBotz Camera Pod 120s. • To specify a unique label for the CCTV Adapter Pod: Double-click on Camera Pods, select the CCTV Adapter Pod from the selection list, and then click Labels and specify labels as usual.
PAGE 4
NetBotz CCTV Adapter Pod 120 4 NetBotz CCTV Adapter Pod 120