User's Guide

22 of 64
CBRS Survey UE – User Guide
UG01287 v0.6 December 1, 2020
7 Push the ferrule over the rubber seal to prevent it from coming apart.
Figure 14 - Ferrule placed over rubber seal
8 Place the washer seal over the Ethernet cable as shown below. Ensure that the inside protruding lip is on the
opposite side of the Ethernet plug.
Figure 15 - Washer seal placed over Ethernet cable
9 Place the neck over the Ethernet cable as shown below.
Figure 16 - Neck placed over Ethernet cable